Cub Cadet 435A Especificaciones descargar pdf (Pagina 81)

Electrical System

7. If the regulator/rectifier fails any one of these tests, replace it with a new one.

8. Check the DC amperage output of the regulator/recti-

fier using a an Ammeter of sufficient capacity or a DC

Shunt tool and a volt meter set to read on the millivolt

scale, as described in the TOOLS section of this

chapter.

9. If the regulator/rectifier passes all of these tests, but

the battery is not charging, check the circuit between

the regulator/rectifier DC output (B+) terminal and the

battery positive post for a voltage drop.

See Figure 7.23.

• The harness connector, the 20A fuse, and the hot

post on the starter solenoid all lie between the reg-

ulator/rectifier and the battery.

Test # Pos. Probe COM. Probe Results

1 Housing B+ O.L. (infinite resistance)

2 Housing AC 1 O.L. (infinite resistance)

3 Housing AC2 > 1.0 Ω (5 second delay)

4B+ AC1 0 Ω (Perfect continuity)

5 B+ AC2 > 1.0 Ω

6 B+ Housing > 1.0 Ω

7AC1 B+ 0 Ω (Perfect continuity)

8 AC1 AC2 > 1.0 Ω

9 AC1 Housing > 1.0 Ω

10 AC2 B+ O.L. (infinite resistance)

11 AC2 AC1 O.L. (infinite resistance)

12 AC2 Housing > 1.0 Ω

Figure 7.23

www.mymowerparts.com

For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 135 136

Sin comentarios

Cub Cadet 435A Especificaciones Pagina 81