Cub Cadet 435A Especificaciones descargar pdf (Pagina 118)

RZT-S

112

Spindle removal/installation

To remove/rebuild a spindle:

1. Remove the deck as described at the beginning of

this chapter.

2. Remove the blade following the steps described in

the blade section of this chapter.

3. Remove the belt cover that is over the spindle being

serviced. See Figure 7.17.

4. Slip the deck belt off of the spindle pulley that is to

be serviced.

5. Remove the four screws fastening the spindle to the

deck. See Figure 7.18.

6. Lift the spindle out of the deck shell.

7. Install the spindle by following the previous steps in

reverse order.

NOTE: The four spindle bolts are self-tapping

screws. The new spindle housing will not

have threads in it.

NOTE: Tighten the spindle screws to a torque of

200 - 300 in-lbs (23 - 34 Nm).

Figure 7.17

Belt cover

Figure 7.18

Spindle

www.mymowerparts.com

For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 135 136

Sin comentarios

Cub Cadet 435A Especificaciones Pagina 118