Cub Cadet 122 Especificaciones descargar pdf (Pagina 12)

DRIVING THE TRACTOR

(InternationalCub Cadet 123 Tractor)

BRAKE PEDAL

The brake pedal must q_e pressed all the

way down to activate the safety starting switch.

When the brake pedal is in the depressed posi-

tion it automatically moves the speed control

lever to the "N" position.

The tractor can be stopped either by

pressing the pedal all the way down, or placing

the speed control lever in the "N" position.

LOCKING THE BRAKE

Always lock the brake when dismounting

from the tractor. To lock the brake, press

down on the brake pedal; then place the brake

pedal lock in the engaged position. See lllust.8C.

To disengage the lock, press down on the brake

pedal_ lift the lock up and place it in the dis-

engaged position behind the brake pedal as

shown inllIust.17A.

SPEED CONTROL LEVER

This lever is used to select any speeds

from a standstill "N" position to eight miles

per hour in the forward direction and to four

miles per hour in the reverse direction.

Moving the speed control lever forward

provides increased forward speeds, and mov-

ing the lever rearward provides the reversed

speeds.

Note: Do not rest your foot on the brake

pedal while driving the tractor as this would

cause the speed control lever to return to the

"N" position.

STARTING THE TRACTOR

I. Advance the throttle lever slightly.

Illust. 4.

See

g. Depress the brake pedal by pressing the

pedal all the way down, and move the towing

lever (Illust.4) in drive (horizontal) position,

then move the throttle lever to the position

where the engine operates best for the load to

be handled.

3. Start the tractor in motion by moving

the speed control lever forward or rearward

as de scribed above.

RELEASE LEVER

To push or move tractor for a short distance

or when working on the engine, the release le-

ver (Illust. 4) must be locked in the release

(down) position and the speed control lever must

be in the "N" position. Gaution: Do Not Tow.

STOPPING THE TRACTOR

Move the speed control lever to the "N"

position or use the brake. Before dismounting

always depress the brake pedal.

TRAILING EQUIPMENT TO THE

Trailing-type equipment must be hitched to

the tractor only at the hitch hole in the draw-

bar. Seelllusts. 11 and llA.

When the tractor has a three-point hitch

(lllusts. 11 and 11A) equipment adaptable to the

10

three-point hitch is raised and lowered with

the lift handle. The lift handle can be set to

hold the equipment at various positions by use

of the six notches in the lift handle quadrant.

The lower mounting bracket has three holes

which are used for additional adjustment.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comentarios a estos manuales

Sin comentarios