Cub Cadet 430A Manual del operador descargar pdf (Pagina 26)

Section 7— Service26

Deck Removal

Remove the mower deck from the tractor as follows:

 

the engine, and set the parking brake.

2. Using the deck lift handle, raise the deck to the position

that provides the most horizontal run of the belt between





Lowest Mowing

Position

Deck Lift Handle

Highest Mowing

Position

Figure 7-3

 Sitting behind the tractor facing forward, reach beneath



WARNING! Use caution to avoid pinching your



4. Pull the left side of the belt rearward and downward while



rides out onto the edge of the lower sheave of the pulley.

NOTE: If pulling the right side of the belt, turn the pulley left.

5. While still holding the belt downward, continue turning the



PTO Pulley

PTO Belt

Transmission

Tube

Figure 7-4

6. Lower the deck into the lowest position using the deck lift



7. Pull the cotter pin out of the front deck lift rod securing it

to the deck. See Figure 7-5. Slide the deck lift rod out of the

front hanger bracket.

Front Deck Lift Rod

Cotter Pin

Figure 7-5

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 75 76

Sin comentarios

Cub Cadet 430A Manual del operador Pagina 26