Cub Cadet Sc Series Manual del operador descargar pdf (Pagina 20)

20 Section 8 — troubleShooting

Problem Cause Remedy

Uneven cut 1. Wheels not positioned correctly.

2. Dull blade.

1. Place front and rear wheels in same height

position. (Dual Height Adjusters)

2. Sharpen or replace blade.

Mower will not self propel 1. Belt not installed properly.

2. Debris clogging drive operation.

3. Damaged or worn belt.

4. Drive control out of adjustment.

1. Check belt for proper pulley installation and

movement.

2. Stop engine, disconnect spark plug boot,

and clean out debris.

3. Inspect and replace belt.

4. Adjust drive control. (See Assembly & Set-up

section).

High pullback effort 1. Pulling mower backwards before

transmission disengages.

1. Allow the unit to roll forward slightly without

the drive lever(s) engaged before pulling

backwards.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

Cub Cadet Sc Series Manual del operador Pagina 20