Cub Cadet GTX1054 Manual del operador Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 36
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
 
surface. See Figure 6-2.
4. Turn the water on.
5. 
the engine and place the throttle lever in the FAST (rabbit)
position.
6. 
7. 
engaged for a minimum of two minutes, allowing the
underside of the cutting deck to thoroughly rinse.
8. 
position.
9. 

 Turn the water off and detach the hose coupler from the

 
cutting deck.


running for a minimum of two minutes, allowing the underside
of the cutting deck to thoroughly dry.
Figure 6-2
Lubrication
WARNING! Before lubricating, repairing, or

parking brake, stop engine and remove key to
prevent unintended starting.
Front Wheels
Each of the front wheel axles and rims is equipped with a grease

grease applied with a grease gun after every 25 hours of tractor
operation.
Figure 6-3
Pivot Points & Linkage
Lubricate all the pivot points on the drive system, parking brake
and lift linkage at least once a season with light oil.
Deck Wheels

a grease fitting. Lubricate with a No. 2 multi-purpose grease
applied with a grease gun after every 25 hours of tractor
operation.
21Section 6 — Maintenance & adjuStMentS
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Comentarios a estos manuales

Sin comentarios