Cub Cadet Series 060 Manual del operador

Safety • Assembly • Operation • Maintenance • Troubleshooting • Parts Lists • WarrantyWarning: This unit is equipped with an internal combustion engin

10Figure 4-1Now that you have set up your yard vacuum for operation, get acquainted with its controls and features. These are described below and illu

11Blower ChuteWhen attached to unit, the blower chute is used to blow or scatter yard waste such as leaves, pine needle, or small twigs across yard.WA

12To Remove Blower Chute1. Grasp blower chute with one hand and pull lock rod on mounting bracket with other hand toward engine to release. Refer to

13Using The Hose Assembly1. Place nozzle/hose vac handle in the bottom position on the nozzle to redirect vacuum to the hose assem-bly. See Figure 4-

145Maintaining Your Yard VacuumWARNINGAlways stop engine, disconnect spark plug, and ground against engine before cleaning, lubricating or doing any k

155WARNINGFigure 5-3Figure 5-4The chipper blade is sharp. When sharp-ening blade, wear leather work gloves to protect your hands and follow the origi-

16For repairs beyond the minor adjustments listed here, contact an authorized service dealer. 6Trouble ShootingCauseProblem RemedyEngine fails to star

17NOTES:Use this page to make notes and write down important information.To order replacement parts, contact your local Cub Cadet dealer; or call our

18NOTES:Use this page to make notes and write down important information.To order replacement parts, contact your local Cub Cadet dealer; or call our

19NOTES:Use this page to make notes and write down important information.To order replacement parts, contact your local Cub Cadet dealer; or call our

2Table of ContentsThis Operator’s Manual is an important part of your new yard vacuum. It will help you assemble, prepare and maintain the unit for be

20Model Series 06039411524063423154540738133619181716450444642292826302132315035242533514849504737432720121432117223451098AA

217Parts ListRef. Part No. Description1. 731-0982A Radial Spoke Hubcap2. 749-04172 Upper Handle3. 720-0279 Knob4. 710-0599 Screw, 1/4-20 x.5005. 710-1

22Model Series 06045ABBA3948442151322212024233637130353834404243493214122746441618172647332531697328294105*819111141

237Parts ListRef. Part No. Description1. 664-0095 Bag Assembly2. 681-0154 Screen Assembly3. 710-1054 Hex Screw 5/16-24 x 1.0 4. 781-0490 Chipper Blade

The limited warranty set forth below is given by Cub Cadet LLC with respect to new merchandise purchased and used in the United States, its possession

31Safety LabelsWARNINGThis symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property

42Safe Operation PracticesTraining1. Read, understand, and follow all instructions on the ma-chine and in the manual(s) before attempting to assembl

5Operation1. Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can a

6NOTE: This Operators Manual covers a range of product specifications for various models. Characteristics and fea-tures discussed and/or illustrated i

7Figure 3-2Figure 3-3Figure 3-4Attaching The Handle1. Remove the hairpin clips from the handle brackets and remove the carriage screws and wing nuts

8Figure 3-6Attaching The Hose Assembly5. a. Slide hose adapter of hose assembly into the base adapter located on the left front of the Yard Vacuum. S

9Figure 3-8Attaching The Blower Chute (If Equipped)NOTE: The bag must be removed before installing the blower chute.8. a. Grasp blower chute with one